Digital Cinema Processor QSC DCP 100

The DCP Series is a line of integrated Digital Cinema Processors that bring together all the essential functions of cinema audio: crossovers, booth monitor, routing, EQ, and status monitoring. DCP processors tame the complexity of projection booth audio systems, replacing an assortment of separately sourced parts with a single box that handles everything. Wiring is drastically simplified. Operation is straightforward and intuitive. Networking is comprehensive and extensible. And control — both local and remote — is exhaustive. Simply put, the DCP Series is the world’s most capable and efficient cinema processing solution.
EV Group Cung cap thiet bi rap chieu phim
  • Digital inputs for up to eight channels of audio
  • Network control and monitoring via SNMP
  • Serial automation control via RS-232
  • Analog Inputs for film processors, non-sync and Mic/line
  • Master volume and full 1/3 octave graphic EQ on all channels
  • Booth monitor with touch screen control for easy operation
  • Digital loudspeaker crossovers - three passive or bi-amp screen channels
  • Compatible with all existing DCA amplifiers - thousands of DCA equipped screens are ready for full network monitoring and control
  • Replaces the DCM-1, DCM-10 and DCM-10D for digital projection retrofits
  • Dual power supplies with load sharing for seamless operation in the event of failure
  • SD memory card for quick unit swap - restores all settings
  • Multiple bypass modes routes audio around failed components to insure that the show will go on
  • DCP Manager and DCPNet PC-based application for set-up, control and monitoring
  • DCP Connect mobile app for iPhone and Android provide control and monitoring capabilities via smart phone
  • DSP presets for DCS speakers for great "out of box" performance and reduced set-up time
  • Crossovers support three passive and active 2-way systems
  • Easily integrates with existing film processors for dual film/digital projection systems
  • Continued development of software and firmware will add new capabilities to the existing hardware with easy firmware updates
  • The DCP 100 is designed expressly for the needs of D-Cinema sound systems
    SPECIFICATIONS DCP 100 Digital Cinema Processor
    Front Panel Controls
    Power switch Rocker switch
    Mute control Push button
    Auditorium fader Rotary encoder
    Monitor volume/parameter adjust Rotary encoder
    Menu-driven LCD Touch control LCD
    Rear Panel Connectors
    D-Cinema input DB-25: AES3/EBU channels 1-8
    Audio Formats 5.1, 5.1 EX, 7.1 DS
    Analog input DB-25: Analog audio channels 1-8
    Universal Mic/Line input XLR: Mic (+ phantom pwr) or line level
    S/PDIF input RCA: Stereo digital audio interface and Lt/Rt Matrix
    RCA (L/R) inputs RCA (two): Stereo Left and Right and Lt/Rt Matrix
    Dataport outputs HD-15 (eight): QSC amplifier interface
    Automation inputs 2 x 6-pin Euro-style (six) digitally-sampled analog control inputs
    Serial Control DB-9 RS-232 serial interface
    Logic output 4-pin Euro-style (two) outbound control
    Relay outputs 6-pin Euro-style (two) outbound control
    USB port Config and management interface
    Control RJ45 10/100 Mbps network management
    SD card receptacle Configuration memory card (1 GB min)
    HI and VI Impaired Outputs
    Output stage type Single ended (balanced Z)
    Output impedance 50 ohms
    Nominal output level -11.8 dBu (200 mV rms)
    Loading requirements RMIN = 2 kΩ, CMAX = 4 nF
    Control Network
    Protocol Standard TCP/IP implementation over Ethernet or Fast Ethernet.
    Data rate 10/100 Mbps
    Connection requirements Cat-5 UTP cable or better (100 m maximum length), direct connection to wired network switch ports only, dedicated LAN or VLAN
    Line voltage requirements 100–240 VAC, 50/60 Hz
    Dimensions (HWD) inches 5.25 × 19 × 15.2 
    Dimensions (HWD) mm 133 × 483 × 386
    Weight 16.6 lb (7.5 kg)

Liên hệ

The DCP Series is a line of integrated Digital Cinema Processors that bring together all the essential functions of cinema audio: crossovers, booth monitor, routing, EQ, and status monitoring.

Tài liệu kỹ thuật
Sản phẩm liên quan